当前位置:首页 » Industry News » 正文

Resin Tile Factory Technology: An In-Depth Look at the Core Process Details of Raw Material Molding, and a Guide to Avoiding Pitfalls

The technology used in resin tile factories is a core factor that determines whether the products meet quality standards and how high the production capacity is. This technology encompasses key processes such as raw material blending, molding, and embossing. Since I’ve been involved in workshop management for over a decade, I’d like to highlight a few critical points where problems are likely to arise.

Resin Roof Tile Factory TechnologyWhat are the core processes?

The core production steps primarily involve mixing the raw materials, followed by extrusion molding, then pressure setting, and finally cooling and cutting. The proportions of PVC resin, plasticizers, and stabilizers are key factors that directly determine the flexibility and weather resistance of the roofing tiles, If the mixing ratio deviates by two to three units, there will be a noticeable difference in the product’s color variation and the length of time before it becomes brittle.。

The temperature during mixing must be maintained within the range of 110 to 120 degrees. If the temperature is too low, the plastic will not fully plasticize; if it is too high, the material will degrade.

树脂瓦工厂技术

The precision of the extrusion die cavity determines the appearance of the roof tile pattern and the uniformity of the wall thickness. If wear is detected, the die must be replaced promptly; if the thickness deviation exceeds one millimeter, the die must be scrapped immediately.

How can temperature be controlled to remain stable during production?

Since the temperature window for maintaining a constant pressure is very narrow—ranging from 130 degrees to 150 degrees—if the temperature is too high, bubbling will occur; if it is too low, the embossing will be unclear. Therefore, it is necessary to use an infrared thermometer for real-time monitoring in order to manually adjust the power of the heating elements.

The water temperature of the cooling system must be dynamically adjusted according to seasonal changes. This is because during the summer, when ambient temperatures are high, the mechanical stress generated inside the bearings is relatively high, making the bearings prone to deformation and warping. In contrast, during the winter, when temperatures drop, these physical changes exhibit the opposite characteristics. Therefore, in actual operation, we typically maintain the temperature of the constant-temperature water tank strictly within the optimal range of 25 to 35 degrees Celsius, and we specifically employ a two-stage cooling process that involves rapid cooling followed by gradual cooling.

To put it simply, the technology behind a resin tile factory involves tightly integrating three key elements: raw materials, molds, and temperature. If any one of these steps is delayed or neglected, the yield rate will drop. Only by thoroughly understanding all the parameters can production yield and quality be reliably maintained.

Keywords: Resin Roof Tile Factory Technology

May not be reproduced without permission:Resin Roof Tile Manufacturer_PVC Roof Tile Manufacturer_Plastic-Steel Roof Tile Wholesale Prices_Top 10 Resin Roof Tile Brands - Guangdong Gaoyi Building Materials » Resin Tile Factory Technology: An In-Depth Look at the Core Process Details of Raw Material Molding, and a Guide to Avoiding Pitfalls
分享到
0 赞
上一篇
下一篇

Recommended

Contact Us
13535623681复制已复制