Wall tile

[Product Information

Name：Wall tile
Length: 1050 mm
Width: 500 mm
Thickness: 2.5 mm, 3.0 mm (Thicknesses within the 1.5 mm to 3 mm range can be customized according to the project specifications)
Color: Gray, Red, Brick Red, Blue
Features: corrosion resistance, impact resistance, good low temperature performance, flame retardant, easy installation
Application scope: beautiful countryside, old house remodeling, garden pavilion, tourist attractions, villas, mobile homes, pavilions, farms, flat to slopes and other roofing areas.

[Product Characteristics

Resin tiles are made of anti-aging scientific formula, using PVC as the main raw material and mixing with UV anti-ultraviolet extrusion, shielding extrusion, antioxidant, modifier and other super weather-resistant chemical raw materials. It is produced by the advanced co-extrusion technology in Europe. It can convert the ultraviolet light energy of the sunlight into heat energy and release it, block the oxidization reaction between air and material and add shielding material in the core layer to prevent the penetration of light again, thus greatly prolonging the service life of the tile.

• Excellent corrosion resistance

As a modified plastic, it has the corrosion-resistant properties of plastic itself. It has no chemical reaction when immersed in alkali, salt, and acids up to 60% for 24 hours. Ideal for corrosive plants, acid rain prone areas and coastal areas.

• Good soundproofing

The composite co-extruded core layer shielding structure greatly reduces the spread of sound. In the wind, rainstorms and other external noise impact, has a very good noise absorption effect, than the color plate noise drop of more than 30dB.

• Strong fire resistance

The fireproof performance is tested by the national fire prevention department ≥ B1 level, which is a flame retardant material.

• Excellent water resistance

Dense and non-absorbent, large sheet area reduces roof seams.

• Excellent load resistance

It has good loading performance, and does not produce damage and breakage phenomenon in low-temperature areas under year-round snow accumulation. Tested using 2.0MM thick UPVC tile in the support spacing 600MM under the case of loading 100KG, tile will not produce cracks damage phenomenon.

• Excellent thermal insulation performance

The coefficient of thermal conductivity is 0.325W/M.K, which is about 1/310 of clay tile, 1/5 of cement tile and 1/2000 of color steel tile. At the same time, it is full-shading, which greatly improves the heat insulation performance. The experiment proves that the heat insulation effect is 3~4℃ lower than the color steel plate.

• Good impact resistance

Strong impact resistance. Tested: 1 kg steel ball dropped freely from a height of 3.0 meters without cracking.

• Particularly good insulation

It is an insulated product and will remain intact in the event of an accidental discharge. It is a safer alternative to metal tiles in thunderstorm areas and near high voltage lines.

• green

It does not contain asbestos and radioactive elements and is recyclable, which is fully in line with the requirements of green environmental protection.

It is made of PVC as the main raw material, mixed with UV resistant extruder, shielding extruder, antioxidant, modifier and other super weather resistant chemicals, and is produced by adopting advanced co-extrusion technology in Europe.

The product is produced by the advanced European four-layer co-extrusion technology

• Surface layer--ASA weather resistant and anti-aging layer
• Second interlayer - impact protection layer
• The second layer - thermal insulation and anti-corrosion layer
• Substrate - Wear-resistant layer