Product Category: Resin Tile, Spanish Tile
Keywords: Roman tile, Spanish tile, resin tile, resin tile manufacturers, synthetic resin tile
[Product Characteristics
Offers a 35-year warranty and 10-year colorfastness.
Roman tile/Spanish tile/Resin tile is made of anti-aging scientific formula, using PVC as the main raw material and mixing with UV anti-ultraviolet extrusion, shielding extrusion, antioxidant, modifier and other super weather-resistant chemical raw materials. It is produced by European advanced co-extrusion technology. It can convert the UV light energy of sunlight into heat energy and release it, block the oxidization reaction between air and material and add shielding material in the core layer to prevent the penetration of light again, thus greatly extending the service life of the tile.
- Excellent corrosion resistance
As a modified plastic, it has the corrosion-resistant properties of plastic itself. It has no chemical reaction when immersed in alkali, salt, and acids up to 60% for 24 hours. Ideal for corrosive plants, acid rain prone areas and coastal areas.
- Good soundproofing
The composite co-extruded core layer shielding structure greatly reduces the spread of sound. In the wind, rainstorms and other external noise impact, has a very good noise absorption effect, than the color plate noise drop of more than 30dB.
- Strong fire resistance
The fireproof performance is tested by the national fire prevention department ≥ B1 level, which is a flame retardant material.
- Excellent water resistance
Dense and non-absorbent, large sheet area reduces roof seams.
- Excellent load resistance
It has good loading performance, and does not produce damage and breakage phenomenon in low-temperature areas under year-round snow accumulation. Tested using 2.0MM thick UPVC tile in the support spacing 600MM under the case of loading 100KG, tile will not produce cracks damage phenomenon.
- Excellent thermal insulation performance
The coefficient of thermal conductivity is 0.325W/M.K, which is about 1/310 of clay tile, 1/5 of cement tile and 1/2000 of color steel tile. At the same time, it is full-shading, which greatly improves the heat insulation performance. The experiment proves that the heat insulation effect is 3~4℃ lower than the color steel plate.
- Good impact resistance
Strong impact resistance. Tested: 1 kg steel ball dropped freely from a height of 3.0 meters without cracking.
- Particularly good insulation
It is an insulated product and will remain intact in the event of an accidental discharge. It is a safer alternative to metal tiles in thunderstorm areas and near high voltage lines.
- green
It does not contain asbestos and radioactive elements and is recyclable, which is fully in line with the requirements of green environmental protection.
It is made of PVC as the main raw material, mixed with UV resistant extruder, shielding extruder, antioxidant, modifier and other super weather resistant chemicals, and is produced by adopting advanced co-extrusion technology in Europe.
The product is produced by the advanced European four-layer co-extrusion technology
- Surface layer--ASA weather resistant and anti-aging layer
- Second interlayer - impact protection layer
- The second layer - thermal insulation and anti-corrosion layer
- Substrate - Wear-resistant layer
[Product Color
[Product Accessories
[Product Installation Recommendations]
- Purlins can be square pipe (60mmx40mmx3mm) or C-type steel (100mmx20mmx3mm) or anticorrosive wood square (60x40mm), the purlin spacing is 660mm, arranged from bottom to top.
- The main shingle is installed against the direction of the local wind. Lap a shingle wave, both sides at the same time.
- Install the front ridge tile by cutting off a section of the first ridge tile before installing it.
- Positive and oblique tile installation lap should be sawed flush, positive and oblique ridge tile installation is completed, and then install the three-way tile.
- Fixed parts for special accessories, fixed, first drill holes with an electric drill, hole diameter should be larger than the hook nail screw 2mm, self-tapping screws are recommended to choose the diameter of 6.3mm.
[Product Information
Name: Resin Roman Tile
Price: Negotiable
Thickness: 2.0mm~3mm (interval thickness can be customized)
Length: customized according to customer requirements
Actual width: 1050mm
Effective width: 940mm
Wave height: 40mm
Wave Pitch: 188mm
Section length: 328mm
Purlin spacing: 984mm
Color: white, blue, green, red, gray
Features: corrosion resistance, impact resistance, good low temperature performance, flame retardant, easy installation
[Applications
Beautiful countryside, old house remodeling, garden pavilions, tourist attractions, villas, mobile homes, pavilions, farms, flat to slopes and other roofing areas.
Version:
