1. White hollow tile - bright and energy-saving, Applicable scenes: ✔ Personnel office area ✔ Food processing plant ✔ Production workshop ✔ Warehouse cold storage ✔ Science and technology plant Advantages: High reflectivity (80-85%), effectively reduce the indoor temperature, reduce the air conditioning energy consumption Low heat absorption rate (20-30%), to avoid direct sunlight Low heat absorption rate (20-30%), avoiding heat accumulation caused by direct sunlight ...
Is it better to build a house with a flat roof or a sloped roof? Trends always evolve in turn. The older generation loves flat roofs, but young people rush to build sloped roofs. In the past, limited by economic conditions, self-built houses are mainly simple flat roof. Flat roofs can be used to sunbathe the family's crops, but the real situation is that it is like a steam oven in the summer and moss grows in the rainy season. Over time, even the best reinforced concrete floors will leak, and every year...
Resin tile is not the traditional meaning of plastic tile, according to JG/T 346-2011 standard, the full name of the resin tile called “synthetic resin decorative tiles”, while the plastic tile is no standard of which the first point of Article 4 requires that the surface layer of UV-resistant, high weathering, aging-resistant ASA materials Many low-priced products to cheap ABS, or mixed ABS and recycled materials. Mixed ABS and recycled material production ...
The color steel tiles of the factory, after numerous storms, sound insulation is getting worse and worse, accompanied by water leakage, color loss, rust and other problems? And the naked eye visible brittle, thin. Suggest to choose our PVC tile, our PVC tile has pressure resistance and corrosion resistance, acid rain area can be used, at the same time using a four-layer co-extrusion technology. Compared with ordinary single-layer tiles, it has more...
In more and more places today, resin tiles are used. These tiles are lightweight and inexpensive, and easy to install. Are you curious about how the resin tiles are produced? We put the new material PVC resin powder and other auxiliary materials through a certain proportion, pour into the mixer, and then conveyed to the extruder. Then we add a layer of ASA film through the embossing stick...
ASA synthetic resin tile, the surface of a layer of ASA film anti-aging, UV resistance in the service life of the tile plays a very important role. And ASA film is also divided into good quality and poor quality, good ASA film than poor ASA film price is 3-5 times higher. And ABS is much cheaper than poor ASA. There are many resin tiles on the market...
Resin tiles are a new type of building material, which is mainly characterized by corrosion resistance, strong weather resistance, easy installation and long service life. In modern construction, resin tile has become the material of choice for many people. The corrosion resistance of resin tile is one of the advantages. Traditional building materials, such as color steel tiles, glazed tiles, etc., are susceptible to corrosion by acids, alkalis and other chemicals during...
1. Environmental protection and energy saving: PVC high pit tile is made of PVC, a recyclable material, which reduces environmental pollution. At the same time, it has good heat insulation performance, which can effectively reduce the energy consumption of the building. 2. Anti-aging performance: PVC high pit tiles are specially treated to have good anti-UV and anti-aging performance, long service life, a...
1.ASA-PVC anti-corrosion tiles are impact resistant, stretch resistant and not easily brittle.2.ASA-PVC anti-corrosion tiles have strong toughness and are not easy to blow and deform in case of strong winds. Rainwater will not backflow, much less pile up, thus not aggravating the burden of roof tiles.3. Very strong weathering performance, extending the service life of ASA-PVC anti-corrosion tiles, will ASA-PV...
Why many resin tiles installed less than a year will appear cracking, discoloration and other quality problems? The reason is because there is no ASA layer or the ASA layer is very thin, most of the cheap resin tiles, the thickness of the surface layer is only 1/3 of the thickness of the national standard, and it is very uneven. In addition to the rapid fading of the product, there will be the phenomenon of color stripe cloth, fading and color stripe cloth phenomenon, with the surface layer...
