What to do when installing synthetic resin tiles with wrong drilled holes?? Many customers will encounter accidentally drilling self-tapping screws by mistake when installing Yunnan synthetic resin tiles, which can be divided into three situations.
One,Minor: just put the line is not allowed to cause the screws are not installed in the sandalwood, this situation is as long as the wrong drilled holes with glass glue to fill in, fill in a good position next to the new installation from the side, and so that the waterproof cap of the lower cover can be covered to hit the location of the glass glue.
Second, and the former situation is similar, but due to the deviation of the position of the large, waterproof cap of the lower cover can not cover the wrongly punched holes, this time you can change the screw with a nut, the waterproof cap fixed in the resin tile.
Third, is due to the installation is not familiar with the large area of the installation of the wrong synthetic resin tile, need to rework, but the installation of synthetic resin tiles with holes in the tiles, this can only be re-purchased synthetic resin tiles. Here also remind the customer in the installation of the use of synthetic resin tile to understand the installation method before construction.
