Why the resin tile price from ten dollars to fifty dollars gap so big? Expose the truth!

In recent years due to the domestic rise of the flat slope project and the new rural construction needs, which ASA synthetic resin tiles as a new type of roof tiles with anti-aging, anti-ultraviolet radiation, corrosion resistance, frost resistance, insulation, thermal insulation, flame retardant and widely used in plant renovation and new rural renovation projects. However, after several years of development, in the past two years, many buildings due to synthetic resin tiles and quality problems abound, obviously the relevant departments recommended the use of green environmental protection and anti-aging performance is quite good synthetic resin tiles, how the life will be so short? For consumers, because they do not know the line, do not understand the production process and the resin tile products are still very strange, the quality of the resin tile good or bad do not know how to identify, but these quality problems by our consumers to assume?

I came to break the rules of the trade, the synthetic resin tile industry in the deep water to clean up, restore the truth!

Those who know should know that synthetic resin tile is super weathering engineering resin ASA and PVC resin as the main material, add stabilizers, impact modifiers, imported UV agents, antioxidants, flame retardants and other expensive additives, the use of today's advanced co-extruded technology once processed into a new type of roof tiles. Qualified synthetic resin tile thickness is 2.0 mm to 3.0 mm thick, however, now some unscrupulous manufacturers in order to obtain high profits, the competition to get more customers, even in the raw materials to do the trick; the following list of a few synthetic resin tile prices can produce factors:

How to identify the good and bad resin tile, shopping tips

1. ASA synthetic resin tile, which is important to the surface layer of a layer of anti-aging, UV-resistant high-quality ASA resin, however, the ASA engineering resin is also divided into good quality and poor, generally good ASA price of more than 30,000 or so, of course, if imported then it reaches more than 40,000 or even more than 50,000 a ton, poor more than 8,000 or more, poor ASA aging resistance performance is poorer, easy to fade. So accounting for the overall cost difference of at least 8 dollars.
2. Resin tiles in the thickness of the article, some manufacturers through the 3.0mm thickness of resin tiles made of 2.8mm thickness, so it seems that the raw material is saved, the price can even be a difference of 6 dollars. Also has a competitive advantage, but the quality and strength of the resin tile has been discounted.
3. Polyvinyl chloride (PVC) as the main material, its price is also determines the price and quality of resin tile good or bad. Some irresponsible manufacturers reduce the quality in order to increase profits, and even use recycled PVC (recycled material) powder to produce resin tile.
4. Then there is the ratio of raw materials, the price of these raw materials are not the same, some by adding calcium carbonate to increase the weight, calcium powder price of only a few hundred yuan a ton, so the overall cost is low, some by adding more plasticizers to achieve the tile has a certain degree of flexibility, but the plasticizer is easy to volatilize, a few months after the volatilization is easy to crack, and does not fire prevention, the fire grade does not meet the standards.
5. Some unscrupulous manufacturers even use ABS as a surface layer, because ABS raw materials are only a few thousand yuan / ton, very cheap. But according to theory, ASA's anti-aging weathering performance is dozens of times that of ABS, which means that the life of ABS relative to ASA to nearly 20 years. And easy to fade (a few months fade) easy to brittle crack (embrittlement temperature -7 ℃).
6. Resin tile cost is also related to each manufacturer's production process, plant rent, labor, utilities and other costs, so different manufacturers prices are not the same, the difference of one or two dollars is also to determine the overall cost of resin tile.

Only listed above, enough to let people feel the resin tile industry, the depth of the water, and thus understand why the resin tile price difference can be as high as ten dollars. So I would like to suggest that consumers in the purchase of high-quality synthetic resin tiles can not only recognize the “price”. The key is still to look at the quality! Never for a moment of cheap and lead to greater losses later! There is a saying! A penny a penny! Good goods are not cheap, cheap no good!