Resin tile construction requirements, resin tiles are divided into resin tiles and synthetic resin tiles, the market known as resin for the general synthetic resin tiles. Synthetic resin tiles are developed by SABIC, one of the world's top 500 companies, using ASA, a highly weather-resistant engineering resin. The effective width is within 1.5 meters.
Introduction to the construction requirements of resin tiles
I. Installation tools and accessories
1, tools: engineering line, portable electric drill, electric drill bit socket, portable cutter, tape measure, steel ruler, wrench, portable grinder.
2、Accessories: waterproof ring, protection pad, self-tapping nails, self-tapping wood screws, stainless steel angle hooks, waterproof cap.
3、Accessory materials: resin glue, resin powder, (the construction of drilling holes drilling wrong phenomenon will be two kinds of materials after mixing to add).
II. Roofing requirements
1. Slope
Synthetic resin tiles are suitable for sloping roofs with a slope of 20 to 80 degrees.
2、Purlin
Common purlin material and size (mm): wood square 60×40, square steel pipe 60×40×3, C-beam 100×50×3 .
Metal purlin shall be brushed with antirust oil once and top coat twice. Wooden purlin should be brushed with anti-corrosion oil or dipped in bitumen oil. The position of top purlin is 180mm away from the ridge line, which is convenient for installing the ridge tile, and the position of bottom purlin is 50~70mm away from the eave opening.The distance between the purlins of the bamboo-shaped main tile shall not be more than 660mm, and the distance between the purlins of the large-arc main tile shall not be more than 750mm.
