The main component of synthetic resin tile is synthetic resin, which is a class of synthetic polymer. Under the action of external forces can be plastic flow state, some properties and natural resin similar. The surface material of synthetic resin tile is the key, the selection of surface material directly affects the service life of the resin tile, in most cases the selection of super weather-resistant material ASA or PMMA, co-extruded through the surface after molding. The weather resistance of the product directly leads to the service life of the synthetic resin tile. At the same time, the quality of synthetic resin tiles is also related to the amount of surface materials used and the co-extrusion technology.
Synthetic resin tile is a new type of building material developed by using high-tech chemical technology, with light weight, high strength, waterproof and moisture-proof, anti-corrosion and flame retardant, sound and heat insulation, etc. It is commonly used in development zones, farmers' markets, shopping malls, residential neighborhoods, new rural construction, villas, canopies, awnings, and antique buildings, etc. The specifications of synthetic resin tile are 1050mm-960mm or 880mm-800mm. The specifications of synthetic resin tiles are 1050mm-960mm or 880mm-800mm, and the common specifications of transparent glazed resin tiles in the market are 1050-960-220; each section is 0.25m or 0.22m.
Synthetic resin tile installation precautions.
1. Installers need to be certified professionals to ensure the safety of product use. Installers must wear gloves, helmets, safety belts and other tools and take safety precautions.
2.If the weather is bad, please install carefully. When installing, walk on the tiles, try to step in the middle of the tiles and avoid stepping on the edge of the tiles. In addition, contact with surfaces with strong acids and alkalis is strictly prohibited.
3, do not over bend the tiles to avoid damage. The thermal expansion and contraction of synthetic resin tiles is different from that of steel, so it is necessary to reserve space for expansion and pay attention to the embedded depth, otherwise the tiles may be deformed and cracked.
4, the process of installation, the above is to use special tile hooks, pressure code, especially in the tile eaves, must be pressed with pressure code. In addition, in the process of construction, you need to use neutral glass glue and suitable gasket material to prevent water leakage. And the materials used need to be produced by regular manufacturers, bringing better quality and less prone to detail problems.
